AutoDome™ SystemTC700 Series Camera, Lens, Pan/Tilt,and Receiver/Driver ModulesUser’s Manual
10since both zones are the same. A dome operator cansee where the backlight compensation zone will averagein the field-of-view.Electronic Shutter (AUX
11ILLUSTRATIONSTilt MotorSite Address ThumbwheelDIP SwitchesRemove FoamPrior To OperationS9407002AEConnectorRemove Screw & Shipping Bracket Prior
Patented under U.S. Patent No. 5,517,236ALL SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE. INFORMATION FURNISHED BY PHILIPS COMMUNICATION & SECU
2IMPORTANT SAFEGUARDS 1. Read Instructions - All the safety and operating instructions shouldbe read before the unit is operated. 2. Retain Instruct
3Safety PrecautionsCAUTIONRISK OF ELECTRICSHOCK. DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRICALSHOCK, DO NOT OPEN COVERS. NO USERSERVICEABLE P
4SicherheitsvorkehrungenRISIKO EINES ELEKTRISCHEN SCHLAGES NICHT ÖFFNEN! VORSICHTVORSICHT: UM EINEN ELEKTRISCHEN SCHLAG ZUVERMEIDEN, ABDECKUNG NICHT E
5OBSERVE PRECAUTIONSFOR HANDLINGELECTROSTATICSENSITIVEDEVICESATTENTIONWARNING: Electrostatic-sensitive device. Useproper CMOS/MOSFET handling precauti
6DESCRIPTIONThe TC700 Series AutoDome™ systems are quiet,lightweight, and discreet surveillance dome systemscontaining high sensitivity 1/3-inch image
7Camera - Using Auxiliary ControlsCameraFunctionAuxNo.Description On/Off NotesBL_COMP 20 BacklightCompensationOn/off 1HIGH-LIGHT 21 Highlight On/off 1
8Executing Playback:1. Press ON, AUX 50, ENTER for continuous playback.2. Press ON, AUX 51, ENTER for single playback.Stopping Playback:1. Press Off,
9side of the AC power input to the dome. This is the "zerophase delay" position. The phase delay between the ACline zero crossing and camera
Comments to this Manuals