Burley G4121 mk2 User Manual

BURLEY G4121 mk2 FLUELESS GAS HEATER INSTALLATION, SERVICING & USER INSTRUCTIONS FOR USE IN THE COUNTRIES STATED ON THE DATA PLATE AND CARTON

10 User Instructions WARNINGS 1. Read the instructions before using this appliance. 2. This appliance requires installation and annual servicin

11 material when hot. A propriety non-abrasive ceramic hob cleaner such as ‘hob brite’ can be used to clean the glass. 9. When the heater is not used

12 4 If the unit continues to extinguish after a period of use, do not use it and seek the advice of your installer. 5 Make sure that your installer

2 INTRODUCTION Thank you for choosing this burley product. All of our products carry a CE mark which is awarded by an independent test house (notifie

3 3. GENERAL REQUIREMENTS 3.1 Gas appliances must be installed in accordance with the rules in force. In the UK it is the law that all gas applianc

4 3.19 Do not use whilst painting & decorating, or in newly decorated rooms as the residues can lead to unpleasant smells from the appliance. Al

5 6. Clearance to Walls Rear Clearance - The rear of the appliance can be installed directly against a non combustible wall. A dista

6 9. Laying the Logs Opening the hinged door on the appliance, which is secured by a 10mm nut, gains access to the coals. On no account should the

7 M H L Control Knob Thermostat Burley Appliances is the only company to bench run and thoroughly test every single gas fire it produces. Burley is

8 15. Oxygen Depletion Pilot System There is a highly sensitive oxygen depletion sensor designed into the pilot light. If any part is damaged the en

9 It is imperative that the control compartments, burners and circulating air passageways of the appliance be kept clean. Replacement parts are avail