Burley d'lite Owner's Manual download pdf (Page 7)

Burley d’Lite Owner’s Instruction and Safety Manual

Tongue Installation and Operation

The tongue is the structure that connects the trailer to the bicycle hitch. It is

designed to be removed for storage and to adjust for either trailer or stroller use.

Tip your trailer frame on its back end. If you are working on a rough or dirty

surface, lay down a cloth or other protective barrier to avoid damage to your

trailer. To insert the tongue, slide it through the front and rear tongue mounts as

shown below. Depress the safety button to allow the tongue to insert past the

front tongue mount. The safety button will spring back out once it is completely

behind the front tongue mount.

Both safety pins must be locked in place before using trailer, oth-

er wise roll bar or tongue could shift and cause an accident or serious

injury.

Trailer Use

For use as a trailer, line up the rearmost hole on the tongue with the hole in the

rear tongue mount. Insert the pin through both holes. Once inserted, rotate the

pin’s spring clip to engage the pin underneath the tongue mount. Always check

to ensure the tongue is properly installed before using trailer.

Front Tongue

Mount

Rear Tongue

Mount

Button

Trailer Pin

Hole

Stroller Pin

Hole

Open Locked

1 2 3 4 5 6 7 8 9 10 11 12 ... 27 28

No comments

Burley d'lite Owner's Manual Page 7